- Does FTTP need a phone line?
- Does NBN need a different modem?
- Where do I put the NBN modem?
- Do I plug Ethernet into WAN or LAN?
- Can I move my NBN modem?
- How do I connect my router to my NBN modem?
- Can I get NBN Fibre to my house?
- How does NBN get connected to my house?
- Is the NBN connection box a modem?
- Can I get FTTP NBN?
- Is Fttp the same as NBN?
Does FTTP need a phone line?
Fibre broadband is delivered separately to a phone line so in engineering terms no, but some contracts from ISPs state you need a phone line.
Please speak top your ISP to determine your options..
Does NBN need a different modem?
Where a modem is required, any VDSL2 compatible modem should work with your NBN connection. Note that some suppliers will not provide tech support if you don’t use one of their certified modems/routers. Here’s what you’ll need for each different connection type: Fibre to the Premises NBN: You’ll need a router.
Where do I put the NBN modem?
Grab the Ethernet cable with yellow connectors. Connect one end of the cable to the yellow Ethernet Port on your shiny new modem and the other to the back of your computer. If NBN Co. connect your address using NBN Fibre to the Basement or Node, you’ll connect your Optus modem to the NBN wall socket.
Do I plug Ethernet into WAN or LAN?
This port is intended to connect your router to the modem, and the outside world from there. The LAN ports are designed for connecting to local devices. Plug one Ethernet cable into your modem and the other end into your router’s WAN port.
Can I move my NBN modem?
Yes, however nbn prefers the nbn™ connection box and power supply is connected to fixed power point where possible. … If you need to have the nbn™ connection box or the cables relocated, contact your service provider. They should be able to advise you of the cost and arrange for a technician to move the equipment.
How do I connect my router to my NBN modem?
Connect one end of the Ethernet cable to any LAN port at the back of the NBN box, and then connect the other end of the Ethernet cable to the WAN port at the back of the D6300 router. Power on your D6300 modem/router and wait until the Wi-Fi LED turns solid blue.
Can I get NBN Fibre to my house?
The simple explanation: Fibre to the Premises – or Fibre to the Home – is one of the best ways your house can be connected to the NBN. … The technical explanation: A Fibre to the Premises (FTTP) connection uses fibre optic cables to connect your home or business directly to the NBN.
How does NBN get connected to my house?
A full-fibre connection requires an ‘NBN utility box’ to be fixed to the outside of your premises, and an ‘NBN connection box’ installed inside your premises that your computer, router and phone will be connected to. Customers are also offered an optional back-up battery box for inside the premises.
Is the NBN connection box a modem?
Fixed Wireless, Fibre to the Curb (FTTC), Fibre to the Premises (FTTP), and Hybrid Fibre Coaxial (HFC) all have a nbn™ installed device that acts as the modem. This means these connections only require a router for WiFi.
Can I get FTTP NBN?
All homes will be connected to the NBN in some form by 2020. In some areas, NBN Co is building FTTP, but in most it is only building fibre to the node (FTTN) or fibre to the curb (FTTC), which utilises some of Australia’s ageing copper network or cable television lines.
Is Fttp the same as NBN?
FTTP was considered the best nbn™ connection due to its superior speed. FTTP offers typical download speeds of up to 100Mbps and upload speeds of up to 40Mbps. Some FTTP connections can achieve up to 1Gbps for downloads and 400Mbps for uploads. By way of comparison, FTTN offers speeds of around 50Mbps to 100Mbps.